TECH T-2x WiFi Thermostat

Underfloor heating control

The TECH T-2x WiFi Thermostat not only keeps the room air at a set temperature, it can also control underfloor heating. This helps you maintain comfort while reducing the risk of floor overheating. Thanks to the floor protection function, the zone heating switches off automatically when the floor temperature reaches the maximum value you set.

You can also set a minimum floor temperature to avoid overcooling. If the actual floor temperature drops to this level, the zone heating activates automatically. This way you can maintain a comfortable room temperature while helping to optimise heating energy use.

Precise temperature settings

The T-2x WiFi controller allows very accurate room temperature adjustment using a weekly schedule. You can:

• set target temperatures for different times of day,
• define time intervals in 15‑minute steps when the temperature differs from the default setting,
• use a Constant temperature mode that maintains a single set temperature regardless of the schedule.

You can also program a time limit for Constant mode, so the thermostat can keep a steady temperature either with or without an active schedule, depending on your needs.

Remote control via app

With the eModul app you can manage your home temperature from anywhere via WiFi. Remote access allows:

• temperature adjustment at any time,
• energy savings through optimised heating control,
• preparing the home climate before you return,
• creating weekly schedules tailored to household routines,
• choosing operating modes (normal, vacation, eco, comfort),
• viewing statistics and temperature charts for different periods,
• convenient control from a smartphone or tablet.

Key features

• Remote control over WiFi: Adjust heating and cooling from anywhere via the eModul app on your smartphone or tablet.
• Heating and cooling control: Suitable for both heating and cooling systems for year‑round comfort.
• Humidity sensing and limitation: Built‑in humidity sensor enables operation with humidity limits in cooling mode, helping to block cooling at high indoor humidity.
• Energy‑conscious operation: Intelligent control helps optimise heating and cooling to support lower energy consumption over time.
• Easy installation and integration: Wireless communication allows quick integration into existing systems, reducing installation time and complexity.
• Modern design: Clean, contemporary look with intuitive LCD display and mechanical buttons for simple, clear operation.
• Wireless design: The controller communicates with its module via 868 MHz radio.
• Heating–cooling changeover: Supports external signal‑based or software‑based changeover between heating and cooling.
• Scheduling: Separate time programs can be set for heating and cooling.
• Operating modes: Three modes (Vacation, Eco, Comfort) for quick adjustments, each with its own heating and cooling setpoints.
• Software updates: Device software can be updated via the cloud service.
• Manual mode: Option for manual switching of the heat source when needed.
• Low‑power operation: Designed for low energy use; battery life depends on usage and battery quality.
• Status information: Online interface shows battery level and signal strength of the room sensor, with automatic notifications for low signal or low battery, plus continuous temperature statistics.
• Mounting options: Can be mounted on a wall or flush box (screws not included). A stand for flat surface placement is included in the package.